• 青岛嘉瑞杰模型
  • 联系人:赵经理
  • 电话:0532-84935753
  • 传真:0532-84935953
  • 手机:15954080912
  • 地址:青岛市城阳 区流亭工业园永丰裕路西段
  • 烟台嘉瑞杰模型
  • 联系人:张经理
  • 电话:0535-8012196
  • 传真:0535-8012197
  • 手机:15098499806
  • 地址:烟台福山区 永福园路545-9号
  • 济南嘉瑞杰模型
  • 联系人:王经理
  • 电话:0531-88670722
  • 手机:15866677695
  • 地址:济南历城青 河南路菜园工业园
新闻中心当前位置:首页 -新闻中心
    手板模型铝合金的 表面拉丝工艺
    2016-11-3 17:18:49
    拉丝可根据装饰需 要,制成直纹、乱纹、螺纹、波纹和旋纹等几种。
    Drawing can be based on the needs of decoration, made of straight lines, random lines, thread, ripple and spiral pattern and so on.
    直纹拉丝是指在铝 板表面用机械磨擦的方法加工出直线纹路。它具有刷除铝板表面划痕和装饰铝板表面的双重作用。直纹拉丝有连续丝纹和断续丝纹两种。
    The straight line drawing is refers to the aluminum plate surface with the mechanical attrition method processing the straight line. It has the dual function of the brush and the surface of the aluminum plate. Straight line drawing has two kinds of continuous filament pattern and interrupted silk pattern.
    连续丝纹可用百洁 布或不锈钢刷通过对铝板表面进行连续水平直线磨擦(如在有装置的条件下手工技磨或用刨床夹住钢丝刷在铝板上磨刷)获取。改变不锈钢刷的钢丝直径,可获得不同粗细的纹路。
    Continuous threads available 100 clean cloth or stainless steel brush through continuous horizontal lines on the surface of aluminum friction (as in a device under the condition of manual skill grinding or planer clamped in the aluminum wire brush grinding brush) to get. Change the diameter of stainless steel wire brush, can obtain different thickness of the lines.
    断续丝纹一般在刷 光机或擦纹机上加工制得。制取原理:采用两组同向旋转的差动轮,上组为快速旋转的磨辊,下组为慢速转动的胶辊,铝或铝合金板从两组辊轮中经过,被刷出细腻的断续直纹。
    Intermittent threads in brushing machine or brush grain machine manufacturing. Preparing principle: the two groups with the differential wheel rotation, group for grinding roller fast rotating rollers, slow rotation of the group, or Aluminum Alloy aluminum plate from the two groups in the roller, brush out the delicate intermittent straight lines.
    乱纹拉丝是在高速 运转的铜丝刷下,使铝板前后左右移动磨擦所获得的一种无规则、无明显纹路的亚光丝纹。这种加工,对铝或铝合金板的表面要求较高。
    Chaotic pattern drawing is the copper wire brush in high-speed operation, make a no rules, no obvious grain Matt silk pattern aluminum plate to move around the friction. This process, the surface of aluminum or aluminum alloy plate requires a higher.
    波纹一般在刷光机 或擦纹机上制取。利用上组磨辊的轴向运动,在铝或铝合金板表面磨刷,得出波浪式纹路。
    In general corrugated brushing machine or brush machine for grain. By using the axial movement of the upper group grinding roller, the surface of the aluminum or aluminum alloy plate is brushed, and the wave pattern is obtained.
    旋纹也称旋光,是 采用圆柱状毛毡或研石尼龙轮装在钻床上,用煤油调和抛光油膏,对铝或铝合金板表面进行旋转抛磨所获取的一种丝纹。它多用于圆形标牌和小型装饰性表盘的装饰性加工。
    Twistcore also known as optical rotation, is the use of cylindrical felt or nylon wheel installed in the machine grinding stone, kerosene reconcile a polishing ointment, thread rotary polishing the surface of aluminum or Aluminum Alloy plate. It is used for decorative processing of circular plate and small decorative dial.
    螺纹是用一台在轴 上装有圆形毛毡的小电机,将其固定在桌面上,与桌子边沿成60度左右的角度,另 外做一个装有固定铝板压茶的拖板,在拖板上贴一条边沿齐直的聚酯薄膜用来限制螺纹竞度。利用毛毡的旋转与拖板的直线移动,在铝板表面旋擦出宽度一致的螺纹纹路。
    The thread is a circular felt the shaft is provided with a small motor, which is fixed on the desktop, from the angle of about 60 degrees and the edge of the table, also equipped with a carriage fixed plate pressure tea, with a neat polyester film edge straight on the carriage to limit the thread of competition. Linear movement by rotation and carriage felt, in the surface of the rotary plate to wipe out the width of thread lines consistent.
    本文的精彩内容由 青岛手板提供,更多的内容 请点击我们的官方网站:http://www. 或者来电咨询。
    Wonderful content in this paper is provided by the Qingdao board, more information please click our website or contact us: http://www..
友情链接:    必发彩票   三号彩票   万豪彩票   幸运彩票   万豪彩票