• 青岛嘉瑞杰模型
  • 联系人:赵经理
  • 电话:0532-84935753
  • 传真:0532-84935953
  • 手机:15954080912
  • 地址:青岛市城阳 区流亭工业园永丰裕路西段
  • 烟台嘉瑞杰模型
  • 联系人:张经理
  • 电话:0535-8012196
  • 传真:0535-8012197
  • 手机:15098499806
  • 地址:烟台福山区 永福园路545-9号
  • 济南嘉瑞杰模型
  • 联系人:王经理
  • 电话:0531-88670722
  • 手机:15866677695
  • 地址:济南历城青 河南路菜园工业园
新闻中心当前位置:首页 -新闻中心
    河北手板制作   中需 要手工加工的步骤
    2019-4-10 15:14:54
    手板通常是刚研发 或设计完成的产品均需求做手板,手板是考证产品可行性的第一步,是找出设计产品的缺陷、缺乏、弊端最直接且有效的方式,从而对缺陷停止针对性的改善,直至不能从个别手板样中找出缺乏。河北手板制造完成前阶段的工作 后,后期还需求停止手工一系列的操作,才干出废品,今天小编就给大家细致列出下面的河北手板手工加工制造步骤和流程:
    Handplate is usually the first step to verify the feasibility of the product. It is the most direct and effective way to find out the defects, shortcomings and shortcomings of the design product, so as to stop the improvement of the defects, until the shortcomings can not be found from individual handplate. After the completion of the pre-stage work of Hebei Handboard Manufacturing, the latter needs to stop a series of manual operations in order to produce waste products. Today, the small edition gives you a detailed list of the following steps and processes of Hebei Handboard Manufacturing:
    1、丝印:在我们曾 经做好的手板样品的平面上印字或图案。
    1. Silk Printing: Printing or pattern on the plane of the sample we have made.
    2、拉丝:在铝的外 表拉出一条条细痕,使样质量感更好。
    2. Wire drawing: Pull out fine marks on the surface of aluminium to make the sample feel better.
    3、喷油:将曾经做 出来的手板样品依照客户的请求,在无尘油房的环境里喷上颜色,使手板样品愈加生动、鲜艳,增加手板样品的真实感。
    3. Fuel injection: Spray color on the hand plate samples that have been made according to customer's request in the environment of dustless oil room, make the hand plate samples more vivid and bright, and increase the authenticity of the hand plate samples.
    4、手工处置:将 CNC、SLA、复模等三种方式 做出来的样品停止抽样打磨,装配。这个程序是把一切零件组件成一个废品。
    4. Manual disposal: Samples made by CNC, SLA and duplicate mould are sampled, polished and assembled. This program is to turn all parts into a scrap.
    5、镭雕:用激光打 掉产品外表的油漆,使部份位置透光。比方:手机按键,车载DVD按键。镜片等。

    5. Radium carving: Laser is used to knock off the paint on the surface of the product to make part of the position transparent. For example: mobile phone keys, car DVD keys. Lenses, etc.

    河北手板制作



    6、电镀:为了产品 局部细节更醒目,涂上的一层烙银的产品色,电镀前的样件必需十分润滑。不能有任何杂质痕迹,然后浸泡在化学药水中。此过操作分为:水渡和真空渡。
    6. Electroplating: In order to make the local details of the product more eye-catching, the sample before electroplating must be very lubricated. No trace of impurities can be found and then immersed in chemical solution. The operation can be divided into water ferry and vacuum ferry.
    7、高光:在曾经做 好外表处置的铝样品上,再用高速CNC加工一圈,显露铝 的本性。
    7. Gao Guang: On the aluminium sample which has been disposed of externally, it is processed by high-speed CNC to reveal the nature of aluminium.
    8、移印:在手板不 平的面上印字或图案。此工艺制造,需有丝印的根底上多做一块钢板。
    8. Imprinting: Printing or pattern on the uneven surface of the hand plate. This process requires an additional plate to be made on the silk-printed base.
    9、氧化:即阳极处 置,使铝的外表发作氧化反响,构成一层膜,让产品不易刮花。
    9. Oxidation: Anode disposal makes the appearance of aluminium react with oxidation, forming a layer of film, which makes the product not easy to scratch.
    本文由河北手板厂家进行编写,想 要了解更多的产品及更详细的精彩内容,请关注我们的官方网站:http://www.您的惠顾是对我们 很大的支持。
    This article is written by Hebei Handboard Manufacturers. For more products and more detailed and exciting content, please pay attention to our official website: http://www.. Your patronage is a great support to us.
友情链接:    必发彩票   必发彩票   博钻彩票   东森彩票   盛世彩