• 青岛嘉瑞杰模型
  • 联系人:赵经理
  • 电话:0532-84935753
  • 传真:0532-84935953
  • 手机:15954080912
  • 地址:青岛市城阳 区流亭工业园永丰裕路西段
  • 烟台嘉瑞杰模型
  • 联系人:张经理
  • 电话:0535-8012196
  • 传真:0535-8012197
  • 手机:15098499806
  • 地址:烟台福山区 永福园路545-9号
  • 济南嘉瑞杰模型
  • 联系人:王经理
  • 电话:0531-88670722
  • 手机:15866677695
  • 地址:济南历城青 河南路菜园工业园
新闻中心当前位置:首页 -新闻中心
    青岛手板的表面处 理工艺有哪些?
    2019-4-8 16:58:22
    手板在制作完成之 后,还有很重要的一步就是对其进行便面工艺的处理,下面我们就以青岛手板为例,看看他们的表面处理工艺都有那些吧!
    After the handboard is made, another important step is to treat its instant noodles. Let's take Qingdao handboard as an example and see what their surface treatment techniques are.
    1,依据CMF阐明图停止选择需 求外表处置的配件停止分类。比方那些事需求电镀的,那些事需求喷涂的,那些需求丝印的等,依据请求停止分类。
    1. According to the CMF illustration diagram, stop selecting the parts to be disposed of according to the requirement appearance. For example, those things that require electroplating, those things that require spraying, those things that require silk printing, etc., stop categorizing according to the request.
    2,依据分类将需求 外发外表处置的配件停止外发。比方:电镀件或者铝合金氧化等,则要外发到特地的电镀厂家,或氧化厂家,模型厂家是做不了的。需求丝印的则需求外发菲林文件,制造菲林片,跟丝印网板,待网板制造好后,才干拿回来丝印 。
    2. According to the classification, the accessories for external disposal of demand should be stopped. For example: electroplating parts or aluminium alloy oxidation, etc., should be sent to special electroplating manufacturers, or oxidation manufacturers, model manufacturers can not do. The need for silk printing is to distribute Film documents, manufacture Film film, and screen printing plate. After the screen plate is manufactured, the screen printing can be brought back.

    3, 需求喷涂的则由特 地的喷涂师傅依据CMF上的PT号停止调油漆,然 后直接喷涂,再放进烤箱烤一会固化油漆。普通模型厂商都会有本人的全套喷涂设备,否则生意就无法做了。喷涂的时分除了喷产品以外,还会额外的喷上色板,便当后期产品量产核对颜色。

    青岛手板展示


    3. Special spraying master will stop adjusting the paint according to PT number on CMF, then spray directly, and then bake in oven for a while to solidify the paint. Ordinary model manufacturers will have their own spraying equipment, otherwise business will not be able to do. In addition to spraying products, there will be additional spraying color plate, so as to check the color of later products.
    4,实体五金件,假 如要做拉丝或者喷砂雾面效果,则 设计师需求提供砂 号,比方粗砂,还是细砂,最好也在CMF文件上面标注分明 。假如还有字符镭雕的话,则要标明镭雕深浅。
    4. Solid hardware, if you want to do wire drawing or sand blasting fog effect, then the designer needs to provide sand numbers, such as coarse sand or fine sand, it is best to also mark clearly on the CMF document. If there is character radium carving, it should indicate the depth of radium carving.
    5,除了常规的外表 处置以外,比方要做半透的,水转印的,UV转印的,IML等有特殊外表处置 的,手板模型上是很难到达真实产品一样的效果的,所以,只能大约的看看效果,要想看到圆满的效果,则需求开模以后做出来才干表现。
    5. In addition to conventional appearance disposal, such as semi-transparent, water transfer, UV transfer, IML and other special appearance disposal, it is difficult to achieve the same effect as the real product on the hand model. Therefore, we can only look at the effect approximately. If we want to see a satisfactory effect, we need to make the performance after opening the model.
    好了,今天的内容 就给大家介绍到这里了,更多关于青岛手板的精彩内容欢迎关 注我们的官网:http://www.
    Well, today's content will be introduced to you here, more wonderful content about Qingdao Handboard welcome to pay attention to our official website: http://www.
友情链接:    诚信彩彩票官方网站   世爵彩票   幸运彩票   万豪彩票   必发彩票